24
4.3.4.4
Colours, text and pictograms
4.3.4.4.1
I-SAFE 1
Screenshot 6: LED settings for the I-SAFE 1
For each speed threshold (1), it is possible to adjust the following parameters:
•
What will be displayed for each sequence (2): speed (in green, yellow or red), a pictogram or
a fine. The pictogram can be selected from the library, it can be edited and new pictograms
can be created as well.
Fine amounts can be defined in the “Fines” tab based on speed
thresholds.
•
Type of blinking (3) (Flash display)
3 general parameters can also be adjusted:
•
Speed threshold for the triggering of flash lamps (4) (199 km/h = no flash)
•
The time span of each measure (5)
•
Display brightness (intensity of the LEDs) (6)
In the example above:
-
between 5 and 50 km/h: smiley in green followed by the speed in green during 3 seconds (i.e.
1.5 second for each message) blinking slowly.
-
between 51 and 70 km/h: maximum 50 speed sign followed by the sign showing kids going to
school followed by the speed in orange during 3 seconds (i.e. 1 second for each message)
blinking slowly.
-
between 71 and 90 km/h: Kids going to school sign followed by the speed in orange and a
message showing the fine during 3 seconds (i.e. 1 second for each message) blinking
progressively faster.
1
2
2
2
3
4
5
6
7
8
9
