22
5
REPEATER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Auto repeater
(USA version only)
The USA version automatically activates the repeater settings
(DUP– or DUP+ and tone encoder ON/OFF)
when the operating
frequency falls within the general repeater output frequency
range and deactivates them when outside of the range.
D
Setting the auto repeater function ON/OFF
q
Push [PWR] to turn power OFF.
w
While pushing [SET(LOCK)], turn power ON to enter initial
set mode.
e
Push [SET(LOCK)] several times until the “RPT” display
appears as shown below.
r
Rotate the tuning dial to turn the repeater lockout function
to “R1,” “R2” or OFF.
• “R1”: auto repeater is ON, tone encoder is OFF.
• “R2”: auto repeater is ON, tone encoder is ON.
t
Push [PWR] to exit initial set mode.
D
Frequency range and offset direction
Auto repeater function is
turned OFF.
Auto repeater function is ON,
tone encoder is ON.
While pushing [SET(LOCK)],
turn power ON.
USING
INITIAL SET MODE
Frequency range
Duplex direction
145.200–145.495 MHz
“–” appears
146.610–146.995 MHz
147.000–147.395 MHz
“+” appears