19
REPEATER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
5
■
Accessing a repeater
q
Set the receive frequency
(repeater output frequency)
.
(pgs. 00–00)
w
Push [LOW(DUP)] for 1 sec., one or two times, to select
minus duplex or plus duplex.
• “–” or “+” appears to indicate
the transmit frequency for
minus shift or plus shift, re-
spectively.
• When the auto repeater func-
tion is turned ON (available for
the USA version only), steps
w
and
e
are not necessary.
(p. 00)
e
Push [TONE(T-SCAN)] several times to turn ON the sub-
audible tone encoder, according to repeater requirements.
• “ ” appears
• 88.5 Hz is set to default; refer to p. 00 for tone frequency settings.
• When the repeater requires a different tone systems, see p. 00.
r
Push and hold [PTT] to transmit.
• The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
• If “OFF” appears, confirm that the offset frequency (p. 00) is set
correctly.
t
Release [PTT] to receive.
y
Push [MONI(ANM)] to check weather the other station’s
transmit signal can be received directly.
u
To return to simplex operation, push [LOW(DUP)] for
1 sec., once or twice, to clear the “–” or “+” indicator.
i
To turn OFF the subaudible tone encoder, push [TONE(T-
SCAN)] several times until no tone indicators appear.
z
Set the receive frequency (repeater output fre-
quency). (pgs. 00–00)
x
Push [
DUP
– 7] to select minus duplex; push
[
DUP
+ 8] to select plus duplex.
c
Push [FUNC] then [
DUP
– 7(TONE)] to turn ON
the subaudible tone encoder according to re-
peater requirements.
• Refer to p. 00 for the tone setting.
• When the repeater requires a different tone system,
see p. 00.
v
Push and hold [PTT] to transmit.
b
Release [PTT] to receive.
n
Push [
MONI
1] to check weather the other sta-
tion’s transmit signal can be received directly.
m
To return to simplex operation, push [
SIMP
9].
,
To turn OFF the subaudible tone encoder, push
[FUNC] then [
ENT
C(T-OFF)].
DUP–
7
DUP+
8
SIMP
9
Either “–” or “+” appears.