![background image](http://html1.mh-extra.com/html/icom/ic-v8000/ic-v8000_instruction-manual_2038143005.webp)
2
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
y
BANK•OPTION SWITCH [BANK(OPT)]
➥
Selects memory memory bank when pushed. (p. 00)
➥
Push for 1 sec. to turn the DTMF decoder ON and OFF
when the optional UT-108 is installed. (p. 00)
u
SET•LOCK SWITCH [SET(LOCK)]
➥
Selects set mode when pushed.
➥
Switches the lock function ON and OFF when pushed
for 1 sec. (p. 14)
i
TUNING DIAL [DIAL]
Selects the memory channel (p. 00), call channel (pgs. 00,
00, 00), the contents of the set mode display and the
scanning direction (p. 00).
o
MEMORY WRITE SWITCH [MW(S.MW)]
➥
Enter to memory edit mode when pushed. (p. 00)
➥
Program into the selected memory channel when
pushed for 1 sec. (p. 00)
• Continue to hold the switch to increment the memory channel
automatically.
!0
MONITOR•CHANNEL NAME SWITCH [MONI(ANM)]
➥
Push to switch the monitor function ON and OFF. (p. 00)
➥
Push for 1 sec. to toggle the frequency indication and
channel name indication. (p. 00)
!1
OUTPUT POWER SWITCH [LOW(DUP)]
➥
Each push changes the output power selection. (p. 00)
➥
Select DUP–, DUP+ and simplex operation when
pushed for 1 sec. (p. 00)
!2
TONE/TONE SCAN SWITCH [TONE(T-SCAN)]
➥
Each push selects a tone function. (p. 00)
• Tone encoder, pocket beep, tone squelch or tone function
OFF can be selected.
➥
Push for 1 sec. to start/stop the tone scan function.
(p. 00)
!3
VFO/MHz TUNING•SCAN SWITCH [V/MHz(SCAN)]
➥
Selects and toggles VFO mode and 1 MHz or 100 kHz
tuning when pushed. (p. 00)
• Cancels a scan when pushed during scan.
➥
Starts scan when pushed for 1 sec. (p. 00)
D
Microphone connector
(front panel view)
q
+8 V DC output (Max. 10 mA)
w
Channel up/down
e
8 V control IN
r
PTT
t
GND (microphone ground)
y
MIC (microphone input)
u
GND
i
Data IN
q
i