![background image](http://html1.mh-extra.com/html/icom/ic-v8000/ic-v8000_instruction-manual_2038143048.webp)
45
DTMF MEMORY ENCODER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
10
■
Programming a DTMF code
DTMF codes are used for autopatching, controlling other
equipment, etc. The transceiver has 10 DTMF memory chan-
nels (d0–d9) for storage of often-used DTMF codes of up to
24 digits.
z
Push [FUNC] then [
LOW
6(DTCS)] to turn the
DTMF encoder ON.
• “d” appears in place of the 100 MHz digit.
x
Push [
SET
B(D-OFF)] to enter the DTMF mem-
ory programming condition.
c
Push [
Y
] or [
Z
] to select the desired DTMF
memory channel.
v
Push the desired digit keys.
• When the first digit is input, previous memory contents are
cleared automatically.
• “E” stands for “
M
” and “F” stands for “# .”
• Push [
Y
]/[
Z
] and repeat this step if you make a mistake.
• The S/RF indicator shows the digit group. The indication in-
creases every 6 digits.
b
Push [VFO/LOCK] to exit the programming condition.
• The [
CLR
A(MW)] key cannot be used to exit. If pushed, code “A”
is input and the previously programmed data is erased. Repro-
gram in such a case.
DTMF
[EXAMPLE]:
Programming “5428AB453” into DTMF memory channel “d4.”
Push
Push
Push
Push
Push then .