![background image](http://html1.mh-extra.com/html/icom/ic-v8000/ic-v8000_instruction-manual_2038143049.webp)
46
10
DTMF MEMORY ENCODER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Transmitting a DTMF code
D
Automatic transmission (DTMF memory)
z
Push [FUNC] then [
LOW
6(DTMF)] to turn the
DTMF encoder ON.
• “d” appears in place of the 100 MHz digit.
x
Push [
SET
B(D-OFF)] to enter the DTMF mem-
ory programming condition.
c
Push [
Y
] or [
Z
] to select the desired channel.
v
Push [PTT] to transmit the selected memory.
• Exit the programming condition automatically.
• Each push of [PTT] transmits the DTMF code.
b
Push [FUNC] then [
SET
B(D-OFF)] to cancel the
DTMF encoder.
• When the DTMF encoder is turned ON continuously,
each push of the PTT transmits the previously se-
lected DTMF code.
D
Transmitting a DTMF memory directly
z
Push [DTMF-S] to turn the DTMF memory di-
rect selection ON.
• The function indicator (microhpne) lights green.
x
Push the desired DTMF channel number.
• “0” to “9” are available for channel numbers.
• Automatically transmits the selected DTMF code.
NOTE:
When no DTMF code programmed channel
number is pushed, transmits for 1 sec. with-
out DTMF code.
c
Push [DTMF-S] again to deactivate the DTMF
meory direct selection.
D
Manual transmission
z
Push [DTMF-S] to turn the DTMF memory di-
rect selection ON.
• The function indicator (microhpne) lights green.
x
Push one of “A” to “F” key momentarily, then
push the desired DTMF keys.
• A: [
CLR
A(MW)]
B: [
SET
B(D-OFF)],
C: [
ENT
C(T-OFF)]
D: [
SQL
Y
D(MUTE)],
E: [
✱
(TONE-1)]
F: [
SQL
Z
#(16KEY-L)]
• Automatically transmits without pushing PTT.
• The first code, one of “A” to “F”, does not transmit-
ted. DTMF code transmission started from the 2nd
code.
c
Push [DTMF-S] again to deactivate the DTMF
meory direct selection.
DTMF-S
DTMF-S
DTMF