39
8
SCAN OPERATION
■
Scan edges programming
Scan edges can be programmed in the same manner as
memory channels. Scan edges are programmed into scan
edges, 1A/1b to 3A/3b, in memory channels.
q
Set the edge frequency of the desired frequency range in
VFO mode:
➥
Set the frequency using the tuning dial.
➥
Set other data (e.g. repeater settings, etc.) if desired.
w
Push [MW(S.MW)] momentarily.
• “
M
” indicator and channel number blink.
e
Rotate the tuning dial to select one of scan edge channel,
1A, 2A or 3A.
r
Push [MW(S.MW)] for 1 sec. to program.
• 3 beeps sound and the frequency is programmed.
• Scan edge 1b, 2b or 3b is automatically selected when continu-
ing to push [MW(S.MW)] after programming.
t
To program a frequency for the other pair of scan edges,
1b, 2b or 3b, repeat steps
e
and
r
.
• If the same frequency is programmed into a pair of scan edges,
programmed scan will not function.
[EXAMPLE]:
Programming 145.300 MHz and 145.800 MHz into scan edges 1A and 1b, respectively.
Push momentarily.
Rotate for setting frequency, etc.
Rotate
S.MW
MW
Push for 1 sec. and continue to pushing
➠
S.MW
MW
Beep
Beep
Beep
“
Beep
“
“
“
“
“