25
6
MEMORY OPERATION
■
Programming a memory channel
VFO settings, including the set mode contents such as sub-
audible tone frequency, etc., can programmed into a memory
channel.
q
Set the desired frequency in VFO mode.
➥
Push [V/MHz(SCAN)] to select VFO mode.
➥
Set the frequency using the tuning dial.
➥
Set other data (e.g. tone frequency, duplex information,
etc.) if required.
w
Push [MW(S.MW)] momentarily.
• “
M
” indicator and the memory channel number blink.
e
Rotate the tuning dial to select the memory channel to be
programmed.
• Memory channels not yet programmed are blank.
r
Push [MW(S.MW)] for 1 sec. to program.
• 3 beeps sound
• Memory channel number automatically advances when contin-
uing to push [MW(S.MW)] after programming.
✔
CONVENIENT
Memory programming can be performed in versatile ways
e.g. memory channel to the same (or different) memory chan-
nel, memory channel to the call channel, etc.
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel) via the front panel.
Push
Rotate for setting frequency, etc.
Push momentarily.
Rotate
V/MHz
SCAN
S.MW
MW
Push for 1 sec. and continue to pushing
➠
S.MW
MW
Beep
Beep
Beep
“
“
“
“
“