![background image](http://html1.mh-extra.com/html/icom/ic-v8000/ic-v8000_instruction-manual_2038143032.webp)
29
6
MEMORY OPERATION
[EXAMPLE]: Clearing memory channel 20.
Push to select VFO.
Rotate for selecting memory channel.
Push momentarily.
V/MHz
SCAN
S.MW
MW
Push any switch.
Push briefly, then push again for 1 sec.
S.MW
MW
S.MW
MW
Beep
Beep
Beep
“
“
“
“
“
■
Memory clearing
Contents of programmed memories can be cleared (blanked),
if desired.
q
Push [V/MHz(SCAN)] to select VFO mode.
w
Push [MW(S.MW)] momentarily.
• “
M
” indicator and the memory channel number blink.
e
Rotate the tuning dial to select the memory channel to be
cleared.
• Memory channels not yet programmed are blank.
r
Push [MW(S.MW)] briefly, then push [MW(S.MW)] again
for 1 sec.
• 3 beeps sound, then the frequency is cleared.
• “
M
” indicator blinks continuously.
• Scan edges, 1A/1b, 2A/2b, 3A/3b, and the call channel cannot
be cleared.
☞
This operation must be performed within 1.5 sec.
t
Push any switch, except [MW(S.MW)], to return to VFO
mode.
☞
NOTE:
Be careful!— the contents of cleared memories
CANNOT be recalled.