![background image](http://html1.mh-extra.com/html/icom/ic-v8000/ic-v8000_instruction-manual_2038143039.webp)
36
7
CALL CHANNEL OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Programming a call channel
In addition to an operating frequency, duplex information, sub-
audible to information (ton encoder or tone squelch ON/OFF
and its frequency) and an alphanumeric channel names can
be programmed into the call channel.
q
Set the desired frequency in VFO mode.
➥
Push [V/MHz(SCAN)] to select VFO mode.
➥
Set the frequency using the tuning dial.
➥
Set other data as desired.
w
Push [MW(S.MW)] momentarily.
e
Rotate the tuning dial to select the call channel
• “
M
” indicator and large “C” blink.
r
Push [MW(S.MW)] for 1 sec. to program.
• 3 beeps sound and return to VFO mode automatically.
z
Set the desired frequency in VFO mode.
➥
Push [VFO/LOCK] to select VFO mode.
➥
Set the frequency.
➥
Set other data as desired.
x
Push [FUNC], then [
CLR
A(MW)] momentarily.
c
Select the call channel via [
Y
] or [
Z
] .
v
Push [FUNC] then [
CLR
A(MW)] for 1 sec. to
program.
• 3 beeps sound and the return to VFO mode auto-
matically.
MR/CALL
MW
[
Y
]/[
Z
]
[EXAMPLE]:
Programming 145.120 MHz into the call channel via the microphone.
Set the frequency.
Push to select VFO mode.
Push , then .
Push , then push for 1 sec.
➠
Push until large “C” appears.
Beep
Beep
Beep
“
“
“
“
“