![background image](http://html1.mh-extra.com/html/icom/ic-v8000/ic-v8000_instruction-manual_2038143038.webp)
35
CALL CHANNEL OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
7
■
Call channel selection
➥
Push [M/CALL(PRIO)] sev-
eral times to select the call
channel.
• “C” appears instead of mem-
ory channel number indication.
• Push [M/CALL(PRIO)] once or
twice to select memory mode,
or push [V/MHz(SCAN)] to se-
lect VFO mode.
➥
Push [MR/CALL] for 1 sec. to select the call
channel.
• Push [
MR/CALL
] to select memory mode, or push
[VFO/LOCK] to select VFO mode.
■
Call channel transferring
q
Push [M/CALL(PRIO)] several times to select the call
channel.
• Large “C” appears.
w
Push [MW(S.MW)] momentarily, then rotate the tuning dial
to select the memory channel to transfer the contents to.
• To transfer to the VFO, push [MW(S.MW)] for 1 sec.
e
Push [MW(S.MW)] for 1 sec. to transfer when a momen-
tary push was used in the previous step.
• If channel names have been programmed into the call channel,
the names also transferred.
z
Push [MR/CALL] for 1 sec. to select the call
channel.
x
Push [FUNC], [
CLR
A(MW)] momentarily, then
push [
Y
]/[
Z
] to select the memory channel to
transfer the contents to.
• To transfer to the VFO, push [FUNC], then push
[
CLR
A(MW)] for 1 sec.
c
Push [FUNC], then [
CLR
A(MW)] for 1 sec. to
transfer when a momentary push was used in
the previous step.
v
Push [MR/CALL] for 1 sec. to select the call
channel.
• If channel names have been programmed into the
call channel, the names also transferred.
MR/CALL
MW
[
Y
]/[
Z
]
MR/CALL
Push [M/CALL(PRIO)] several
times to select the call channel.
Appears
✔
INFORMATION
When the VFO mode is se-
lected from the call channel,
small “c” appears instead of
memory channel number.
Small “C” shows VFO was
selected from the call channel.