![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131047.webp)
5-5
5.
PRIORITY WATCH
D
Bank scan
Searches the Memory channels in the selected bank
every 5 seconds while receiving on a VFO frequency
VFO frequency and a Memory Bank scan
5 seconds
125 milliseconds
VFO
frequency
M1
M2
M3
Skip
Example: Watching a Bank scan while receiving in
the VFO mode.
M5
Example: BANK A (M1 to M5 are included)
Bank A
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL
PRIO
AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL
PRIO
AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Hold down [V/MHz SCAN] for 1 second to start
scanning
The Priority watch searches for a signal on the
Memory channels in the selected bank every 5
seconds
“
PRIO
” is displayed
Set the receive frequency
Hold down [M/CALL PRIO] for 1 second to start the
Priority watch
Push [BANK OPT] to enter the Memory Bank mode
Rotate [DIAL] to select the bank (Example: Bank A)
“
” and the Memory Channel
number are displayed
Repeatedly push [M/CALL PRIO] to select the
Memory mode
Push any key to exit the Memory Bank mode
“
” and the bank letter are
displayed
1 Set the receive frequency
2 Repeatedly push [M/CALL PRIO] to select the
Memory mode
• “
” and the Memory Channel number are displayed
3 Push [BANK OPT] to select the Memory Bank
mode
• “
” and the bank letter blink
L
The bank name is displayed, if set
4 Rotate [DIAL] to select the desired bank
L
Banks that contain no Memory channels are skipped
5 Push any key to exit the Memory Bank mode
• “
” and the bank letter are displayed
6 Hold down [V/MHz SCAN] for 1 second to start
scanning
• The frequency decimal point and “
” blink
7 Hold down [M/CALL PRIO] for 1 second to start
the Priority watch
• “
PRIO
” is displayed
8 Push [M/CALL PRIO] to cancel the watch
• “
PRIO
” disappears
TIP: When a signal is received
• “
PRIO
” blinks
• The Memory channel is automatically selected
L
The Scan Pause timer and Scan Resume timer settings
are the same as those for a normal scan (p 8-3)
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
“
PRIO
” blinks
“” and “
” blink