![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131025.webp)
3-11
3�
MEMORY OPERATION
The transceiver has a total of 10 banks (A ~ J).
Regular Memory channels 000 ~ 199 and the Scan
edge channels 1A/1B, 2A/2B, and 3A/3B can be
assigned to any bank for easy Memory management�
Up to 100 channels can be assigned to a bank�
Categorizing Memory channels according to their
types or purposes using Memory Banks is convenient�
You can also use the Memory Bank scan function.
1� Select the Memory channel to be assigned to the
bank�
2�
Push [SET LOCK] to enter the Set mode.
3�
Repeatedly push [SET LOCK] or [MONI ANM PA]
to select “BAK” (Bank setting).
4�
Rotate [DIAL] to select the bank.
5. Push any key other than [SET LOCK] or
[MONI ANM PA] to save and exit the Set mode.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Setting a Memory Bank
Push [SET LOCK] to enter the Set mode.
Example: Setting Memory channel 1 to Bank A.
Repeatedly push [SET LOCK] or [MONI ANM] to
select “BAK.”
Rotate [DIAL] to select Bank A.
NOTE:
• The banks are only used to hold Memory
channels� Therefore, if the original Memory
channel content has been changed, the Memory
Bank content is also changed at the same time�
•
To use banks, “BAK” (Bank/Option) must be
assigned to [BANK OPT]. See page 8-6 for details.
Select Memory channel 1�
Push any key other than [SET LOCK] or
[MONI ANM PA] to save and exit the Set mode.