![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131022.webp)
3-8
3�
MEMORY OPERATION
Each Memory and Call channel can be given an
alphanumeric channel name for easy recognition�
L
The maximum number of characters is 6�
L
See the table below for the selectable characters�
1� Select the Memory or Call channel�
2�
Hold down [MONI ANM PA] for 1 second to enter
the Channel Name Display mode.
• Two beeps sound�
• The name is displayed, if set�
3�
Push [SET LOCK] to enter the Channel Name
Programming mode.
• “–” blinks�
4�
Rotate [DIAL] to select a character.
• The selected character blinks�
5. Push [SET LOCK] or [MONI ANM PA] to move the
cursor to the left or right�
6�
Repeat steps 4 and 5 until the channel name is
completed�
7�
Push any key other than [SET LOCK] or
[MONI ANM PA] to set the name.
•
After setting the name, exits the Channel Name
Programming mode.
L
To switch to the frequency display, hold down
[MONI ANM PA] again for 1 second.
NOTE:
When the Channel Name Display mode is
selected and [SET LOCK] is pushed, you can always
access the Channel Name Programming mode.
To access the Set mode, exit the Channel Name
Display mode by holding down [MONI ANM PA] for 1
second�
L
When “NM” is selected in “DSP” (Display type) in the
Initial Set mode, the channel name is displayed by the
•
Selectable characters
(1)
(B)
(L)
(V)
(+)
(,)
(.)
(2)
(C)
(M)
(W)
(–)
(3)
(D)
(N)
(X)
(=)
(4)
(E)
(O)
(Y)
(
✱
)
(5)
(%)
(&)
(’)
(F)
(P)
(Z)
(/)
(])
(^)
(:)
(;)
(<)
(>)
(?)
(@)
([)
(\)
(6)
(G)
(Q)
(space)
(7)
( ( )
(H)
(R)
( ) )
(8)
(I)
(S)
(!)
(”)
(#)
($)
(9)
(J)
(T)
(0)
(A)
(K)
(U)
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
PRIO
M/CALL
SCAN
V/ MHz
PRIO AO BUSY
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
SET
ANM
MONI
DUP
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
SET
MONI
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
PRIO
M/CALL
SCAN
V/ MHz
PRIO AO BUSY
SET
ANM
MONI
DUP
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Entering a channel name
Select Memory channel 5.
Push [SET LOCK] to enter the Channel Name
Programming mode.
Rotate [DIAL] to select “C.”
Repeat until the name is completely
entered�
Push any key other than [SET LOCK] or
[MONI ANM PA] to set the name.
Example: Setting the name “CLUB” to Memory
channel 5.
Hold down [MONI ANM PA] for 1 second to enter the
Channel Name Display mode.
Two beeps sound�
Push [MONI ANM PA] to move the cursor.
“–” blinks�
The next “–” blinks�