![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131064.webp)
7-8
7.
TONE SQUELCH AND POCKET BEEP
The DTCS encoder superimposes the selected DTCS code over your transmitted signal
DTCS encoder (Transmit only)
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
“ ” and “ ” is displayed when the DTCS encoder is
activated
1 Repeatedly push [TONE T-SCAN] until both “ ”
and “ ” are displayed
• The DTCS encoder is activated
2 Push [SET LOCK] to enter the Set mode
3 Set the DTCS code and polarity
L
L
You can set the DTCS transmit and receive polarity,
but the DTCS encoder affects only transmit
4 Push any key other than [SET LOCK] or
[MONI ANM PA] to save and exit the Set mode