![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131053.webp)
6-3
6.
DTMF MEMORY
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
SET
ANM
MONI
AO
NAR
MID
LOW
Using the HM-133V
microphone
1� Hold down [BANK/OPTION] for 1 second to enter
the Option Set mode�
2� Push [MR/CALL] to select “DTM” (DTMF Memory
channel)�
3�
Push [▲] to select “ON.”
• The DTMF Memory encoder is turned ON�
4� Push [SET B D-OFF] to enter the DTMF Memory
mode�
• The DTMF Memory Channel number blinks�
L
The previously entered DTMF code is displayed, if set�
NOTE:
The previously entered code in the selected
DTMF Memory channel will be cleared by doing the
following steps�
5�
Push [▲] or [▼] to select the desired blank DTMF
Memory channel�
6� Push a keypad key to set the desired DTMF code�
• The transceiver automatically enters the DTMF
Memory Programming mode�
L
The [0] to [9], [A] to [D], [
] (E), and [#] (F) keys can
be used�
[E]
[F]
L
When the 6th character is set, the next 6 blank digit
group will be displayed�
L
If a wrong key is pushed, push [▲] or [▼] to set the
code once, and then push keypad keys to reset it�
7� Repeat step 6 until the desired DTMF code entry
(up to 24 digits) is completed�
8�
Push [▲] or [▼] to set the code.
9� Push [VFO/LOCK] to exit the DTMF Memory
Programming mode�
• The 100 MHz digit is changed to “d�”
L
To go back to the Option Set mode, push
[BANK/OPTION]�
Entering a DTMF code
Example: Entering “5428AB453” into DTMF
Memory channel “d3.”
Hold down
for 1 second to enter the Option Set
mode�
Push
to select “DTM�”
Push
enter the DTMF Memory mode�
Push
or
to select “d3�”
Push
to enter “5�”
Push
to exit the DTMF Memory Programming
mode�
The DTMF Memory Channel
number blinks�
Repeatedly push keypad keys until the
desired DTMF code entry is complete�
Push
or
to set the code�
The DTMF Memory Channel
number stops blinking�
The 100 MHz digit is
changed to “d�”
Push
to select “ON�”