![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131077.webp)
9-5
9.
OTHER FUNCTIONS
Occasionally, erroneous information will be displayed when, for example, first applying power� This may be caused
externally by static electricity or by other factors� If this problem occurs, turn OFF the transceiver� After waiting a
few seconds, turn ON the transceiver again� If the problem is still there, perform a Partial reset or an All reset�
BE CAREFUL!
An All Reset clears all settings and returns all settings to the factory defaults�
Resetting
D
Partial Reset
1� Hold down [ ] for 1 second to turn OFF the
transceiver�
2� While holding down [V/MHz SCAN], hold down [ ]
for 1 second to turn ON the transceiver�
TIP:
A Partial Reset resets the operating settings to
their default values (VFO frequency, VFO settings,
the Set mode, the Initial Set mode, and the Option
Set mode contents) without clearing the items below:
• Memory channel contents
• Scan Edge channel contents
• Call channel contents
• DTMF Memory contents
D
All Reset
1� Hold down [ ] for 1 second to turn OFF the
transceiver�
2� While holding down [SET LOCK] and
[S�MW MW], hold down [ ] for 1 second to turn
ON the transceiver�
• “CLEAR” is displayed�
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
[ ]
[V/MHz SCAN]
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
[ ]
[SET LOCK]
[S�MW MW]