![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131071.webp)
8-7
8.
SET MODES
Emergency channel
(Default: VFO)
Selects a channel used for an emergency purpose�
• VFO:
The frequency set in the VFO mode is
set as an Emergency frequency�
• MR 0 ~ 199: The selected Memory channel is set
as an Emergency frequency�
• MR 1A ~ 3B: The selected Scan Edge channel is
set as an Emergency frequency�
• CAL:
The Call channel is set as an
Emergency frequency�
SET
ANM
MONI
AO
NAR
MID
LOW
Emergency Alert volume
(Default: MAX)
Selects whether or not to sound the beeps, the alert,
and the received signal when using the Emergency
Call function�
• MAX: The countdown beeps and the long beep will
sound when the Emergency Call function is
turned ON�
An Emergency alert will sound at maximum
volume when the Emergency signal is
transmitted�
The Emergency signal will sound at
maximum volume when it is received�
• MIN: The countdown beeps and the long beep
will not sound, even if the Emergency Call
function is turned ON�
No Emergency alert will sound, even if the
Emergency signal is transmitted�
No Emergency signal will sound, even if it is
received�
SET
ANM
MONI
AO
NAR
MID
LOW
Temporary volume
(Default: 0)
Sets the volume level when the Temporary Volume
function is turned ON to between 0 (OFF), 1
(minimum) and 32 (maximum)�
L
You can use the function as “One-Touch Mute” by setting
this item to “0�”
SET
ANM
MONI
AO
NAR
MID
LOW
Initial Set mode items