3-4
3�
MEMORY OPERATION
Selecting a Call channel
The factory default frequency is entered in the Call
channel�
z
Repeatedly push [M/CALL PRIO] to select the Call
channel�
•
A “C” is displayed.
L
Push [M/CALL PRIO] again to select the Memory
mode, or push [V/MHz SCAN] to select the VFO
mode�
NOTE:
When the VFO mode is selected from the
Call channel, a small “c” is displayed instead of the
Memory channel number�
Using the HM-133V microphone
z
Hold down [MR/CALL] for 1 second to select the
Call channel�
L
Push [MR/CALL] to select the Memory mode, or push
[VFO/LOCK] to select the VFO mode.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Call channel
“C” is displayed�
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Set the frequency in the VFO mode.
Push [S.MW MW] to enter the Memory Write mode.
Rotate [DIAL] to select Memory channel 20.
Hold down [S.MW MW] for 1 second to write.
3 beeps sound�
Example: Entering 145.870 MHz to Memory
channel 20.
Entering a Memory/Call channel
The VFO settings, including the Set mode contents,
such as subaudible tone frequency and so on, can be
entered into a Memory or Call channel�
1�
Set the frequency in the VFO mode.
L
If desired, set other data (Example: frequency offset,
duplex direction, and tone squelch)�
2�
Push [S.MW MW] to enter the Memory Write
mode�
• “
” and the Memory channel number blink�
3�
Rotate [DIAL] to select a Memory or Call channel.
L
If the selected Memory channel is blank, only the
Memory channel number is displayed�
4�
Hold down [S.MW MW] for 1 second to write.
• Three beeps sound�
L
The Memory channel number automatically increases
when holding down [S.MW MW] after writing.
NOTE:
You can also set a Memory channel in other
ways�
Example:
Entering the Memory contents to a different
Memory channel or the Call channel�
(p� 3-7)
“
” and the Memory Channel
number blink�