![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131083.webp)
11-3
11 INSTALL AND CONNECTIONS
Installing in a vehicle
R
DANGER! NEVER
place the transceiver where
airbag deployment may be obstructed
R
WARNING! NEVER
place the transceiver where
normal operation of the vehicle may be hindered or
where it could cause bodily injury
DO NOT
place the transceiver where hot or cold air
blows directly onto it
25º
More than 100 mm
(39 inches) height
(recommended)
NOTE:
Contact your Icom dealer or car dealer for
advice on installing in a vehicle
D
Mounting the transceiver
You can install the transceiver on the dashboard or
the console of your vehicle with the supplied mounting
bracket
1 Drill 4 holes where the supplied mounting bracket
is to be installed
L
Approximately 55 ~ 56 mm (021 ~ 022 inch)(d)
when using nuts, approximately 2 ~ 3 mm
(008 ~ 012 inch)(d) when using self-tapping screws
2 Insert the supplied screws, nuts, and washers
through the mounting bracket and tighten
3 Adjust the angle to suit your needs
Mounting
nut
Nut
Spring washer
When using self-
tapping screws
Flat washer
Screws