![background image](http://html1.mh-extra.com/html/icom/ic-v3500/ic-v3500_advanced-manual_2038131037.webp)
4-6
4.
SCAN OPERATION
Memory Bank scan
D
Bank scan
A Bank scan searches through the Memory channels
in the selected bank�
L
Two or more Memory channels, which are not set as skip
channels, must be entered to start a Memory Bank scan�
1� Repeatedly push [M/CALL PRIO] to select the
Memory mode�
• “
” and the Memory Channel number are displayed�
2� Push [BANK OPT] to select the Memory Bank
mode�
• “
” and the bank letter blink�
L
The bank name is displayed, if set�
3� Rotate [DIAL] to select the desired bank�
L
Banks that contain no Memory channels are skipped�
4� Push any key to exit the Memory Bank mode�
• “
” and the bank letter are displayed�
5� Hold down [V/MHz SCAN] for 1 second to start
scanning�
• The frequency decimal point and “
” blink�
L
When a signal is detected, the scan pauses
according to the Scan Stop timer setting, and then
resumes�
L
Push [MONI PA ANM] to stop or resume the scan�
6� Push [V/MHz SCAN] to cancel the scan�
TIP:
During a scan, rotating [DIAL] changes the
scanning direction�
Example: Starting a Bank scan in Bank A.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Hold down [V/MHz SCAN] for 1 second to start
scanning�
Push [BANK OPT] to enter the Memory Bank mode�
Rotate [DIAL] to select Bank A�
“
” and the Memory Channel
number are displayed�
Repeatedly push [M/CALL PRIO] to select the
Memory mode�
Push any key to exit the Memory Bank mode�
“
” and the bank letter are
displayed�
“�” and “
” blink�
“
” and the bank letter blink�