![background image](http://html.mh-extra.com/html/icom/ic-m510/ic-m510_instruction-manual_612840096.webp)
83
10
MENU SCREEN
Inactivity Timer
The transceiver automatically returns to the
operating screen if you push no key for the
set period of time for each mode.
z
Not DSC Related
Setting for when a screen that is not
related to DSC is displayed.
z
DSC Related
Setting for when a screen that is related
to DSC is displayed.
z
Distress Related
Setting for when a screen that is related
to a Distress call is displayed.
z
RT Related
Setting for when the transceiver is in the
Radio Telephone mode.
GPS
Selects a satellite to be used for GPS
(Global Positioning System) to pinpoint
the geographic location of your transceiver
anywhere in the world.
This setting may not be usable, depending
on the transceiver version or presetting.
z
GPS
The GPS (Global Positioning System) is
permanently set to ON.
z
GLONASS
Selects whether or not to use the data
from the GLONASS (GLObal’naya
NAvigatsionnaya Sputnikovaya Sistema)
satellites.
z
SBAS
Turns the SBAS (Satellite Based
Augmentation System) function ON or
OFF.
When turning ON this function, the GPS
position accuracy can be improved.
RX Hail er
Set the RX Hailer function.
L
See page 73 for details.
Noise Cancel
The Noise Cancel function reduces random
noise components in the received or
transmitted signal. Set the function for both
receiving and transmitting.
z
RX
OFF:
The Noise Cancel function is OFF.
Low: Reduces random noise
components in the received
signal to approximately one half.
Mid: Reduces random noise
components in the received
signal to approximately one third.
High: Reduces random noise
components in the received signal
to approximately one tenth.
z
TX
ON: Reduces random noise
components in the transmitted
signal to approximately one third.
OFF:
The Noise Cancel function is OFF.
PWR SW from MIC
Select weather or not to turn OFF the
transceiver at the same time that you turn
OFF the command microphone.
L
The optional command microphone is
required to use this function.
z
All Units
When you turn OFF the command
microphone, the transceiver is turned
OFF at the same time.
z
Own Unit
The transceiver is not turned OFF
even if you turn OFF the command
microphone.
Model
(For only the European version)
Select the country where you operate the
transceiver.
L
After select the country, “The Settings are
reset. Are you sure?” is displayed. Push
OK
to return to the Confi guration
screen.
L
If no country is selected, “General” is
automatically selected.
D
Settings
Summary of Contents for IC-M510
Page 128: ......