manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 15

2

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

2

1

 PANEL DESCRIPTION

P W R

Function 

display (p. 4)

Speaker

 

■

 Front panel

1 

DISTRESS KEY [DISTRESS]

   Hold down for 3 seconds to transmit a 

Distress call. (p. 21)

2 

ENTER KEY [ENT]

   Push to set the entered data, selected 

item, and so on.

3 

LEFT/RIGHT KEYS [◄]/[►]

 •Push to scroll the Software Key 

functions. (pp. 6 ~ 7)

 •Push to select a character or number 

in the entry mode. 

(pp. 8, 14, 19~20)

4 

UP/DOWN KEYS [▲]/[▼]

 •Push to select an operating channel, 

Menu items, Menu settings, and so on. 

(p. 10)

 • Push to select a character or number 

in the entry mode. 

(pp. 14, 19~20)

5 

MENU KEY [MENU]

   Push to display or close the Menu 

screen.

6 

CLEAR KEY [CLEAR]

    Push to cancel the entered data or to 

return to the previous screen.

7 

CHANNEL 16/CALL CHANNEL KEY 

[16/C]

 •Push to select Channel 16. (p. 10)

 •Hold down for 1 second to select the 

Call channel. (p. 10)

8 

DISPLAY KEY [DISP] 

   Push to switch the main screen between 

the INFO, the Plotter, and the Highway 

screens.

9 

CHANNEL/ENTER/POWER DIAL 

[CH/ENT]/[PWR]

 •Hold down for 1 second to turn the 

transceiver ON or OFF.

 •Rotate to select the operating 

channels, Menu items, Menu settings, 

and so on.

 •Push to set the entered data, selected 

item, and so on.

10

  

SOFTWARE KEYS 

(pp. 6 ~ 7)

   Scroll the key functions pushing [◄] or 

[►], then push either of the 4 software 

keys to select the function displayed at 

the bottom of the display.

11

  

SQUELCH DIAL [SQL] 

(p. 12)

   Rotate to adjust the squelch level.

12

  

VOLUME DIAL [VOL]

 (p. 12)

   Rotate to adjust the volume level.

13

  

MICROPHONE  CONNECTOR

CAUTION:

 Be sure that the 

microphone connector is tightened 

completely (rotate clockwise) to 

maintain the transceiver’s waterproof 

protection.

1

2

3

4

5
6
7
8

9

10

 

11

 

12

 

13

 

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands