manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 53

40

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

DIGITAL SELECTIVE CALLING (DSC)

7

 

D

  Receiving a Position Request call

  (May not be used, depending on the presetting)

NOTE:

 Even if the Auto ACK function is set to “Manual,” after receiving a Distress 

Acknowledgment, or while in the Distress Cancel call procedure, the Position Reply is 

automatically sent to the calling station.

When a Position Request call is received:

 •An alarm sounds.

 •

“Received POS Request” is displayed.

1.  Push 

Alarm OFF

 to turn OFF the alarm.

2. 

Push the Software Key below the intended operation.

Ignore

:

Ignores the call and returns to the 

operating screen.

 •The call is saved in the DSC Log.

 •“ ” blinks continuously until you display 

the call message.

Hold

:

Holds the RX call task, and returns to the 

Main screen.

Able

:

( Able  to 

comply)

Sends Acknowledgment “Able to comply” 

right away.

Unable

:

(Unable to 

Comply)

Sends an Acknowledgment “Unable to 

Comply.”

 •The call is saved in the DSC Log.

 •

Displays the Acknowledgment 

information, and then returns to the 

operating screen by pushing 

STBY

, and 

then 

OK

.

Accept

 :

Accepts the call.

 •Displays the received call’s information.

 •The call is saved in the DSC Log.

 Push 

ACK Able

 or 

ACK Unable 

, then push 

Call

 to send the Position Reply call. 

(p. 32)

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands