manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 39

26

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

DIGITAL SELECTIVE CALLING (DSC)

7

 

D

  Sending an Individual Acknowledgment

When you have received an Individual call (p. 38), send an Acknowledgment to the 

calling station. When the Auto Ack is set to “Manual,” you can select an appropriate 

acknowledgment type.

1.  While an Individual call is being received, push 

Alarm OFF

 to turn OFF the alarm.

 •The received call’s information is displayed.

2.  Push 

The received call’s information is displayed.

Accept

.

 •

The Acknowledgment category screen is displayed.

 

L

If you want to send an Acknowledgment “Able to 

comply” right away, push 

Able

.

 

L

If you cannot communicate, and want to return to the 

operating screen, push 

Ignore

.

3.  Push 

ACK Able

, 

ACK Unable 

, or 

ACK New CH 

 to select the 

Acknowledgment type.

ACK Able

: 

(Able to 

Comply)

Sends an Acknowledgment without any 

changes.

ACK Unable 

: 

(Unable to 

Comply):

Sends an Acknowledgment but cannot 

communicate.

ACK New CH 

:

(Propose 

New CH)

Sends an Acknowledgment. You can 

specify the Voice Communication 

channel. 

(Example: Channel 16)

4.  Push 

Call

 to send the Acknowledgment.

9. 

When you receive an Acknowledgment “Able to comply”:

 •An alarm sounds.

 •The screen on the right is displayed.

10.  Push 

Alarm OFF

 to turn OFF the alarm.

 •The channel assigned in step 7 is automatically 

selected.

 

L

If the called station cannot use the channel that you 

assigned, a diff erent channel is selected by the other 

station.

11.  Push 

Close Window 

.

12. 

Hold down [PTT] to communicate.

TIP:

 If you received an Acknowledgment “Unable to comply”:

1.  Push 

Alarm OFF

 to turn OFF the alarm, and then push 

Close Window 

.

 •

The Acknowledge information is displayed.

2.  Push 

STBY

, and then 

OK

 to return to the operating screen. 

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands