manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 66

53

8

AIS FUNCTION

5 

DISPLAY FILTER INDICATOR

Displayed when the type of targets on 

the plotter screen are fi ltered. (p. 59)

[MENU] > Settings > AIS 

> 

Target Display

Indicator

Description

Only Danger AIS targets 

are displayed.

Only Friend AIS targets 

are displayed.

Only waypoints are 

displayed.

No indicator All targets are displayed.

6 

NAVIGATION LINE

Displays a line from the start position of 

navigation to the AIS target or waypoint.

7 

 TARGET  BOX

Displays the selected target.

 

L

When a target box is displayed, push 

Target Details  

 to display the detail 

screen of the selected target.

8 

VESSEL TRACK

Displays your vessel track.

9 

ANCHOR WATCH

 •

Displays   (a red circle) as the start 

position of anchor watch.

 •

Displays a red dashed circle as the 

range of anchor watch.

10

  

DISPLAY RANGE

 •

Displays the selected display range.

 •

Push 

Range

 to select the desired 

display range.

 

L

 0.125, 0.25, 0.5, 0.75, 1.5, 3, 6, 

12, 24, 36 NM (nautical miles) are 

selectable.

 

D

 Plotter screen

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands