manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 31

18

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

DUALWATCH/TRI-WATCH 

(Except for the NLD version)

6

 

■

  Description

Dualwatch and Tri-watch are convenient to periodically check Channel 16 while you are 

operating on another channel.

When a signal is received:

  On Channel 16:

 

 Dualwatch/Tri-watch pauses on Channel 16 until the signal 

disappears.

  On the Call channel:

  Tri-watch switches to Dualwatch until the signal on the Call 

channel disappears.

 

■

  Operation

1.  Select Dualwatch or Tri-watch on the Menu screen.

[MENU] > Settings > Radio > 

Dual/Tri-Watch

2.  Push [▲] or [▼], or rotate [CH/ENT] to select a channel.

3.  Push [◄] or [►] to display 

Dual Watch

 or 

TRI Watch

.

4.  Push 

Dual Watch

 or 

TRI Watch

.

 •

Dualwatch or Tri-watch starts.

 •

“DUAL 16” is displayed for Dualwatch, or “TRI 16” is 

displayed for Tri-watch.

 

L

“

” is displayed when a signal is received.

 

L

A beep tone sounds and “16” starts to blink when a 

signal is received on Channel 16.

5.  To cancel Dualwatch or Tri-watch, push 

Dual Watch

 or 

TRI Watch

 again.

CH 16

CH 16

Dualwatch

Tri-watch

Operating 

channel

Operating 

channel

Call 

channel

Periodically checks Channel 

16 while operating on another 

channel.

Periodically checks Channel 16 and 

the Call channel while operating on 

another channel.

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands