manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 92

79

10

MENU SCREEN

 

■

Using the Menu screen

The Menu screen is used to set items, select options, and so on for the transceiver’s 

functions.

 

D

Menu screen operation

Example:

 Setting the key beep to “OFF.”

1.  Push [MENU].

 •The Menu screen is displayed.

2. 

Push [▲] or [▼], or rotate [CH/ENT] to select 

“Settings,” and then push [ENT], [CH/ENT], or [►].

 •The “Settings” screen is displayed.

 

L

Holding down [▲] or [▼], or rotate [CH/ENT] 

sequentially scrolls up or down through the Menu 

screen.

3. 

Push [▲] or [▼], or rotate [CH/ENT] to select 

“Configuration,” and then push [ENT], [CH/ENT], or 

[►].

 •

The “Configuration” screen is displayed.

4. 

Push [▲] or [▼], or rotate [CH/ENT] to select “Key 

Beep,” and then push [ENT], [CH/ENT], or [►].

 •

The “Key Beep” screen is displayed.

5. 

Push [▲] or [▼], or rotate [CH/ENT] to select “OFF,” 

and then push [ENT] or [CH/ENT].

 •“OFF” is set and the transceiver returns to the previous 

screen.

TIP:

 • To exit the Menu screen, push [MENU].

 •

 To return to the previous screen, push [◄] or [CLEAR].

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands