![background image](http://html.mh-extra.com/html/icom/ic-m510/ic-m510_instruction-manual_612840081.webp)
68
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
OTHER FUNCTIONS
9
Selecting in the AIS list:
1. Open the list screen.
[MENU] > AIS >
Target/Danger/Friend list
2.
Push [▲] or [▼] or rotate [CH/ENT] to select an AIS target.
3. Push
NAV
.
•“Start navigation. Are you sure?” is displayed.
4. Push
OK
to start navigation.
•The plotter screen is displayed, and the transceiver starts to navigate.
•
is displayed on the plotter screen.
TIP:
You can also start navigation in the details on the AIS target.
1. Repeat steps 1 and 2.
2. Push
Details
, [ENT], or [►].
•The “Details” screen is displayed.
3. Repeat steps 3 and 4.
D
Resetting navigation
The transceiver resets the start position, and restarts
navigation from your current position.
L
The function works only when the transceiver is receiving
valid GPS signals.
L
The function cannot work while in the MOB mode, or when
the transceiver does not navigate.
1. Open the “Reset Navigation” screen.
[MENU] > Navigation >
Reset Navigation
•“Reset navigation. Are you sure?” is displayed.
2. Push
OK
.
•The transceiver resets the start position, and restarts
navigation from your current position.
D
Stopping navigation
1. Push
Stop NAV
to stop navigation.
•“Stop navigation. Are you sure?” is displayed.
2. Push
OK
.
•The transceiver stops to navigate, and then returns to
the previous screen.
Summary of Contents for IC-M510
Page 128: ......