manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 85

72

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

OTHER FUNCTIONS

9

 

■

 Using  the   Intercom

The optional Intercom function enables you to communicate between the deck and the 

cabin. The optional HM-195 commandmic

IV

™

, HM-229 commandmic

V

™, or an Android/

iOS device is required for Intercom operation.

 

L

Connect the HM-195 or HM-229 as described on page 101.

 

L

Download the RS-M500 when you operate by the Android/iOS device.

NOTE: While using the Intercom function,

 •Transmit is disabled.

 •The received call audio is muted.

 •

Operation is disabled on devices other than the two that are using the Intercom function.

1. 

Open the “Intercom” screen.

[MENU] > 

Intercom

2. 

 Select the unit, then push [ENT] or [CH/ENT].

 •

Enters the Intercom mode.

3. 

 Hold down 

Call

 to sound the intercom beeps.

 •The transceiver and the command microphone, or the 

mobile device sound beeps while holding down 

Call

.

 • “Call” is displayed.

4.   After  releasing 

Call

, hold down [PTT] and speak into 

the microphone at your normal voice level.

 • “ Talk” is displayed.

 

L

  To adjust the transceiver volume level, rotate [VOL].

 

L

  To adjust the command microphone’s intercom 

volume level, rotate [VOL/SQL] (Dial) on the 

command microphone.

5.   After releasing [PTT], you can hear the response 

through the speaker.

6.   Push [CLEAR] to return to the previous screen.

NOTE: 

While in the Intercom mode, the transmit and 

receive functions are disabled. When the transceiver is 

transmitting, the Intercom function is disabled.

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands