manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 61

48

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

DIGITAL SELECTIVE CALLING (DSC)

7

 

■

Making an Individual call to an AIS target

You can transmit an Individual call to a selected AIS target, without entering the target’s 

MMSI code. In this case, the call type is automatically set to Routine. 

 

D

Selecting an AIS target on the IC-M510/IC-M510E

You can compose an Individual call to an AIS target selected on the Plotter screen or the 

AIS list. 

NOTE:

 The IC-M510/IC-M510E can be input AIS information from the built-in AIS 

receiver (if built in) or an external NMEA 0183 or NMEA 2000 sentence source.

1.  Select the AIS target from the Plotter screen, the 

Target List, the Friends List, or the Danger list 

(pp. 55, 57).

2.  Push 

DSC

.

 •“Compose Non-Distress” screen is displayed.

3.  Select “Channel,” then push [ENT] or [CH/ENT] to 

display the Voice channel selection screen.

 

L

See page 25 for details.

4.  Select a channel to assign, and then push [ENT] or 

[CH/ENT].

5.  Push 

Call

 to send the Individual call.

6. 

When you receive an Acknowledgment “Able to 

comply”, an alarm sounds. Push 

Alarm OFF

 to turn OFF 

the alarm.

 •The channel assigned in step 4 is automatically 

selected.

 

L

If the called station cannot use the channel that you 

assigned, a diff erent channel is selected by the other 

station.

7.  Push 

Close Window 

.

8. 

Hold down [PTT] to communicate.

 

D

Using an AIS transponder

When the optional MA-510TR CLASS B AIS TRANSPONDER

 is connected to the transceiver, 

you can transmit an Individual call to a selected AIS target and the voice channel on the 

transponder.

 

L

See page 98 for connecting instructions.

NOTE: 

To ensure correct operation of the DSC function, make sure you correctly set the 

CH70 SQL Level. (p. 47)

 

L

See the next page for the operation.

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands