![background image](http://html.mh-extra.com/html/icom/ic-m510/ic-m510_instruction-manual_612840080.webp)
67
9
OTHER FUNCTIONS
■
Navigation
The transceiver assists you to navigate to a selected destination.
L
The function works only when the transceiver is receiving valid GPS signals.
L
The function cannot work while in the MOB mode.
NOTE:
The Navigation function is a supplemental aid to navigation only, and is not
intended to be a substitute for primary navigation equipment.
Using [NAV]:
1. Push
NAV
on the operating screen.
•The “Waypoint” screen is displayed.
2.
Push [▲] or [▼], or rotate [CH/ENT] to select a
waypoint.
3. Push
Start
to start navigation.
•The plotter screen is displayed, and the transceiver
starts to navigate.
•
is displayed on the plotter screen.
4. Push the Software Key for your next operation.
D
Starting navigation
There are 3 ways of setting a destination using
NAV
, selecting in the AIS list, and
selecting in the Waypoint list.
NOTE:
A popup screen is displayed when the vessel arrives at or near the destination.
To stop the function, push any key.
L
When the Audible Alarm function is set to “ON,” an alarm also sounds. (p. 60)
Navigating to a waypoint:
See “Navigating to a waypoint” on page 64 for details.
Summary of Contents for IC-M510
Page 128: ......