manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 78

65

9

OTHER FUNCTIONS

 

■

 MOB (Man Overboard)

You can enter a Man OverBoard (MOB) waypoint into the transceiver with its GPS 

position data, as soon as a person has fallen into the water and needs to be rescued. 

This enables you to reach the MOB location even in the dark, or when you have lost 

visual contact.

You can select an AIS target during the MOB mode.

 

D

 Starting  MOB

 

Push 

MOB

 to enter the MOB mode.

 •Three beeps sound.

 •The plotter screen is displayed, and 

 is displayed at 

your current position on the plotter screen.

 

L

The Arrival and XTE alarms are not detected while in 

the MOB mode.

TIP

: You can also start the MOB mode when you select 

the “Start MOB” item on the Menu screen.

[MENU] > Navigation > 

Start MOB

 

D

Stopping  MOB

1.  Push 

Stop MOB

 to stop the MOB mode.

 •“Deactivate MOB. Are you sure?” is displayed.

2.  Push 

OK

.

 •

 disappears, and the transceiver returns to the 

previous screen.

TIP

: You can also stop the MOB mode by selecting the 

“Stop MOB” item on the Menu screen.

[MENU] > Navigation > 

Stop MOB

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands