![background image](http://html.mh-extra.com/html/icom/ic-92a/ic-92a_instruction-manual_612377054.webp)
Ne
48
7
DV MODE OPERATION (Optional UT-121 is required for IC-92A)
New2001
■
Copying the call sign
D
Copying the call sign memory contents
This function is convenient when or modifying a part of the
current call sign.
NOTE:
Make sure that the “EDIT RECORD” item in DV
set mode is set to “AUTO” or “SELECT” in advance.
(p. 95)
q
During DV mode operation, enter call sign set mode.
• CALL SIGN screen is displayed.
w
Rotate
[DIAL]
†
to select “UR,” “R1” or “R2” as desired,
then push
[
](5)
†
.
e
Rotate
[DIAL]
†
to select the desired call sign channel to
be copied.
• U01–U60 and R01–R60 are available.
• When “AUTO” is set to “EDIT RECORD” item
r
Push
[ ](6)
to select the call sign programming mode.
• A blank channel is selected automatically.
• The 1st digit of the selected call sign blinks.
t
Edit or modify the selected call sign as described in “
D
Station call sign programming”
(p. 36)
or “
D
Repeater call
sign programming”
(p. 41)
.
y
Push
[
](5)
to store the edited/modifi ed call sign into the
selected blank channel.
NOTE:
The message “FULL” is displayed when no blank
channel is available in station or repeater call sign mem-
ory.
Select the desired call sign channel number as described
in step
u
of “• When “SELECT” is set to “EDIT RECORD”
item” at right-hand page in this case.
❮
MENU screen
❯
➪
❮
CALL SIGN
❯
(Push
[MENU/
]
) (Rotate
[DIAL]
†
, then push
[
](5)
†
.)
U21
U21
AB
†
AAAAA
:SET
:SET
:SEL
:SEL
:CUR
:CUR
CLR:CLR
A/a:CHAR
A/a:CHAR
0:CQ
YOUR CALL SIGN
r
A blank channel
number blinks.
Summary of Contents for IC-92A
Page 144: ...New2001 A 6616H 1EX ...