manualshive.com logo in svg

Icom IC-92A, Instruction Manual

Share
Download
Icom IC-92A Instruction Manual Download Page 9

New2001

3

2

PANEL DESCRIPTION

2

i 

KEYPAD 

(pgs. 4, 5)

o

 

CALL/RX

➝

CS KEY [CALL]/[RX

➝

CS](CALL)

➥

  Push to select the call channel/TV channel/weather 

channel. (p. 16)

➥

  During DV mode operation, push and hold for 1 sec. to 

set the received call signs (station and repeaters) for 
operation. (p. 47)

➥

 Enters or sends the DTMF code “C.” (pgs. 103, 104)

!0

  

MEMORY/SELECT MEMORY WRITE KEY [MR]/[S.
MW](MR)

➥

  Push to select memory mode. (p. 15)

➥

  During memory mode operation, push to toggle be-

tween memory and memory bank mode. (p. 68)

➥

  Push and hold for 1 sec. to enter select memory write 

mode. (p. 64)

➥

 Enters or sends the DTMF code “B.” (pgs. 103, 104)

!1

  

VFO/MHz KEY [VFO]/[MHz](VFO)

➥

 Push to toggle select VFO mode. (p. 15)

➥

  During VFO mode operation, push and hold for 1 sec. 

to select and toggle 1 MHz and 10 MHz tuning steps 
(p. 18)

➥

 Enters or sends the DTMF code “A.” (pgs. 103, 104)

!2

 

MENU/LOCK KEY [MENU/LOCK]

 

➥

  Push to toggle menu screen indication ON and OFF. 

(p. 85)

➥

  Push and hold for 1 sec. to toggle the lock function ON 

and OFF. (p. 25)

!3

 

EXTERNAL DC IN JACK [DC IN]

➥

  Connects the supplied wall charger, BC-167, to charge 

the attached battery pack. (p. 10)

➥

  Connect an external DC power supply through the op-

tional CP-12L, CP-19R or OPC-254L for external DC 
operation. (p. 13)

!4

 

DATA JACK [DATA]

Connects a PC through the optional data communication 
cable, OPC-1529R, for low-speed data communication or 
control the transceiver remotely using the optional RS-91 
(OPC-1529R is supplied). (p. 56)

!5

 

VOLUME CONTROL [VOL]

Rotate to adjust the audio output level. (p. 20)

!6

 

CONTROL DIAL [DIAL]

➥

 Rotate to tune the operating frequency. (p. 18)

➥

  During memory mode, rotate to select the memory 

channel. (pgs. 15, 64)

➥

  While pushing and holding 

[BAND]

, selects the operat-

ing band in VFO mode. (p. 18)

➥

  While scanning, changes the scanning direction. (p. 75)

➥

  While pushing and holding 

[SQL]

,

 

sets the squelch 

level. (p. 21)

➥

  While pushing and holding 

[BAND]

, selects the pro-

grammed bank in memory mode. (p. 68)

!7 

EXTERNAL SPEAKER/MICROPHONE JACK [MIC/SP]

Connect an optional speaker-microphone or headset, if 
desired.
See page 122 for a list of available options.

Summary of Contents for IC-92A

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands