Icom IC-92A Instruction Manual Download Page 77

Page: 77 / 144

New2001

MEMORY/CALL CHANNELS

Using the KEYPAD

Push

[MR]

to select memory mode.

Push the keypad to enter 3 digits to select the desired

memory channel.

• The blank channels are also selectable.

• Example— selecting memory channel “25”

Push

[MR]

then push

[0]

[2]

[5]

■

Selecting a call channel

Push

[CALL]

to select call channel mode.

• Pushing

[CALL]

toggles call, TV* and weather

†

channels.

Rotate

[DIAL]

to select the desired call channel.

• “C0” and “C1” are selectable.

* Appears only when TV channels are programmed via the

optional RS-92. Also available for A band operation only.

†

Available for the USA version only.

146 010

010

BANK

BANK :----

:----

MNAME:

SKIP

SKIP :OFF

:OFF

000

[DIAL]

S.MW

Blinks

Rotate [DIAL] to select
the memory channel.

Appears

145 600

025

The entered memory
channel is selected.

S.MW

Keypad

440 000

146 010

VHF band call channel

UHF band call channel

[DIAL]

CALL

Summary of Contents for IC-92A

















































































































































Search results

Summary of Contents for IC-92A

Reviews:

Brands by name

Popular brands

Icom IC-92A, Instruction Manual

Search results

Summary of Contents for IC-92A

Reviews:

Brands by name

Popular brands