![background image](http://html.mh-extra.com/html/icom/ic-92a/ic-92a_instruction-manual_612377105.webp)
101
11
MENU SCREEN OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
Digital monitor
Sets the desired monitoring mode during digital mode op-
eration from “Auto,” “Digital” and “Analog.”
• AUTO
: The transceiver sets monitoring mode to FM
and DV according to the received signal.
(de-
fault)
• DIGITAL : Monitors in DV mode.
• ANALOG : Monitors in FM mode.
D
Digital repeater setting
When accessing a digital repeater with a call sign different
than is programmed, the repeater call sign can be stored
into “RPT1” and/or “RPT2” automatically by reading the re-
peater’s transmission. The stored repeater’s call sign can be
re-called when selecting the repeater call sign. (default: ON)
D
RX call sign auto write
When an individual station call is received, the calling station
call sign can be automatically set in “UR.”
(default: OFF)
D
Repeater call sign auto write
When accessing a repeater with a call sign different than is
programmed, the repeater call sign can be set into “RPT1”
and/or “RPT2” automatically by reading the repeater’s trans-
mission.
(default: OFF)
The transceiver sets the received repeater call sign for
operation. Therefore, when a different call sign is set for
operation, the previously set repeater call sign will be lost.
AUTO
DIGITAL
ANALOG
DIGITAL MONITOR
DIGITAL MONITOR
r
AUTO
AUTO
DIGITAL
DIGITAL
ANALOG
ANALOG
DIGITAL MONITOR
DIGITAL MONITOR
r
ON
OFF
DIGITAL RPT SET
DIGITAL RPT SET
r
ON
OFF
DIGITAL RPT SET
DIGITAL RPT SET
r
OFF
AUTO
RXCALL WRITE
RXCALL WRITE
r
OFF
AUTO
AUTO
RXCALL WRITE
RXCALL WRITE
r
OFF
AUTO
RXRPT WRITE
RXRPT WRITE
r
OFF
AUTO
AUTO
RXRPT WRITE
RXRPT WRITE
r
Summary of Contents for IC-92A
Page 144: ...New2001 A 6616H 1EX ...