![background image](http://html.mh-extra.com/html/icom/ic-92a/ic-92a_instruction-manual_612377076.webp)
72
Ne
New2001
MEMORY/CALL CHANNELS
9
■
General description
The IC-92A/92AD has 850 memory channels in A band, 450
memory channels in B band, and 2 call channels in each
band. Memory channels in each bands including 50 scan
edge memory channels
(25 pairs)
for storage of often-used
frequencies, respectively.
And a total of 26 memory banks, A to Z, are available in
each bands for storing groups of frequencies, etc. Up to 100
channels can be assigned into a bank.
D
Memory channel contents
The following information can be programmed into memory
channels:
• Operating frequency
(p. 18)
• Operating mode
(p. 21)
• Duplex direction
(+DUP or –DUP)
with an offset fre-
quency
(p. 31)
• Subaudible tone encoder
(p. 107)
, tone squelch or
DTCS squelch ON/OFF
(p. 110)
• Subaudible tone frequency
(p. 107)
, tone squelch fre-
quency or DTCS code with polarity
(pgs. 107, 111)
• Scan skip information
(p. 80)
• Memory bank
(p. 67)
• Memory name
(p. 70)
• Tuning step
(p. 18)
• Call sign squelch or Digital code squelch*
(p. 110)
• Station call sign*
(p. 36)
• RPT1/RPT2 call sign*
(p. 41)
*Available for B band operation only.
■
Selecting a memory channel
D
Using [DIAL]— Programmed channels
q
Push
[MR]
to select memory mode.
w
Rotate
[DIAL]
to select the desired memory channel.
• Only programmed channels are displayed.
D
Using [DIAL]— All channels
q
Push
[MR]
to select memory mode.
w
Push and hold
[S.MW](MR)
for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• “
μ
” indicator blinks.
e
Rotate
[DIAL]
to select the desired memory channel.
• All channels are displayed.
• Push
[VFO]
to return to memory mode indication.
A
μ
FM
146 010
000
000
[DIAL]
MR
S.MW
B
Appears
Rotate [DIAL] to select
the memory channel.
Summary of Contents for IC-92A
Page 144: ...New2001 A 6616H 1EX ...