![background image](http://html.mh-extra.com/html/icom/ic-92a/ic-92a_instruction-manual_612377058.webp)
Ne
52
7
DV MODE OPERATION (Optional UT-121 is required for IC-92A)
New2001
■
Message operation
D
TX message programming
TX messages are available for up to 5 channels and each
channel can be programmed with a message of up to 20
characters. Available characters are
0
to
9
,
A
to
Z
(capital let-
ters)
,
a
to
z
(lower case letters)
, some symbols and space.
q
Enter “TX MESSAGE” in message/position set mode.
• TX MESSAGE screen is displayed.
w
Rotate
[DIAL]
†
to select the desired transmit message
channel.
• Ch01 to Ch05 and OFF are available.
• Previously message is displayed if programmed.
e
Push
[ ](6)
to select the message edit condition.
• The 1st digit of the message blinks.
r
Rotate
[DIAL]
†
to select the desired character or symbol.
•
Push
[A/a](3)
to change the character group from “AB” (alpha-
betical characters; capital letters), “ab” (alphabetical characters;
lower case letters), “12” (numbers) and “-!”-” (symbols) in se-
quence.
•
If an un-necessary character is entered, push
[ ](6)
or
[ ](4)
to select the character, then push
[CLR](1)
to erase the se-
lected character, or push and hold
[CLR](1)
for 1 sec. to erase
all characters following the cursor.
t
Push
[ ](6)
to select 2nd digit, then rotate
[DIAL]
†
to se-
lect the desired character or code.
•
Push
[ ](6)
to move the cursor right; push
[ ](4)
to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
y
Repeat the steps
r
and
t
to enter the desired message.
• Up to 20-character messages can be set.
u
Push
[
](5)
to store the message.
i
Push
[MENU/
]
to return to frequency indication.
❮
MENU screen
❯
➪
❮
MESSAGE/POSITION
❯
➪
❮
TX MESSAGE
❯
(Push
[MENU/
]
) (Rotate
[DIAL]
†
, then push
[
](5)
†
.)
Ch01
Ch01
†
:SET
:SET
:SEL
:SEL
:BACK
:BACK
CLR:CLR
CLR:CLR
TX MESSAGE
:EDIT
:EDIT
r
Ch01
Ch01
!''
Hello!
†
:SET
:SET
:SEL
:SEL
:CUR
:CUR
CLR:CLR
A/a:CHAR
A/a:CHAR
TX MESSAGE
r
Summary of Contents for IC-92A
Page 144: ...New2001 A 6616H 1EX ...