![background image](http://html.mh-extra.com/html/icom/ic-92a/ic-92a_instruction-manual_612377092.webp)
Ne
88
9
SCAN OPERATION
New2001
t
Push and hold
[S.MW](MR)
for 1 sec. to store the skip
condition into the memory.
• “SKIP” or “P SKIP” indicator appears, according to the skip se-
lection in the step
r
.
✔
-CONVENIENT!
The the skip setting can be set with the following operation.
q
Select the desired memory channel to be set as a skip
channel/frequency.
w
While pushing
[SKIP](5)
, rotate
[DIAL]
to select the skip
condition from “P SKIP,” “SKIP” and “OFF
(no indication)
.”
✔
-CONVENIENT!
During VFO scanning, such as programmed scan, the skip
setting can be programmed into the highest blank memory
channel which is automatically selected with the following
operation.
q
Start the VFO scan.
➥
Push
[VFO]
to select VFO mode.
• Select the desired frequency band with
[BAND]
, if desired.
➥
Set the squelch level.
➥
While pushing and holding
[SCAN](2)
, rotate
[DIAL]
to
select the desired scanning type.
• “ALL” for full scan; “BAND” for band scan, “PROG-xx (or
scan name if programmed)” for programmed scan (xx= 0 to
24; programmed scan edges numbers are only displayed),
“DUP” for duplex scan.
➥
To start the scan, release
[SCAN](2)
.
• Scan pauses when a signal is received.
• Rotate
[DIAL]
to change the scanning direction, or resumes
manually.
w
When scan pauses and you want to set the paused fre-
quency as a skip frequency.
➥
Push and hold
[SKIP](5)
for 1 sec. to store the paused
frequency into the highest blank memory channel.
• While pushing and holding
[SKIP](5)
, rotate [DIAL] to select
a skip condition from “SKIP,” “P-SKIP” and “OFF.”
• While pushing and holding
[SKIP](5)
, scan pauses; and
after writing the frequency, scan resumes.
FM
A
μ
SKIP
SKIP
033
033
145 700
FM
A
μ
PSKI
PSKIP
033
033
145 700
• Skip channel setting
• Program skip setting
“SKIP” appears
“P SKIP” appears
Summary of Contents for IC-92A
Page 144: ...New2001 A 6616H 1EX ...