![background image](http://html.mh-extra.com/html/icom/ic-92a/ic-92a_instruction-manual_612377130.webp)
Ne
126
12
OTHER FUNCTIONS
New2001
■
Tone scan
The transceiver can detect the subaudible tone frequency
and DTCS code in a received signal. By monitoring a signal
that is being transmitted on a repeater input frequency, you
can determine the tone frequency required to access the re-
peater.
q
Set the desired frequency or memory channel to be
checked for a tone frequency or DTCS code.
w
Push and hold
[TONE](7)
for 1 sec. several times to ac-
tivate the repeater tone, tone squelch or DTCS squelch.
(TONE, TSQL or DTCS)
•
Rotating
[DIAL]
while pushing and holding
[TONE](7)
also se-
lects the tone functions.
e
Push and hold
[T.SCAN](.)
for 1 sec. to start the tone
scan.
• To change the scanning direction, rotate
[DIAL]
.
r
When the tone frequency or DTCS code is decoded, the
set mode contents are programmed with the frequency or
code.
•
The tone scan pauses for the set period in scan pause timer
(p. 96) when a tone frequency or DTCS code is detected.
•
The decoded tone frequency is used for the repeater tone fre-
quency when the tone squelch is OFF.
•
The decoded tone frequency is used for the tone squelch fre-
quency (CTCSS TONE) when the tone squelch is ON.
•
The decoded DTCS code is used for the DTCS code when the
DTCS squelch is ON.
t
Push
[VFO]
to stop the scan.
•
If the scan is cancelled before the transceiver detects the tone
or code, the set mode contents are not changed.
•
The detected tone is temporary operation only. The stored tone
setting in memory or call channel won’t be changed.
A
MemoName
MemoName
PRIO
PRIO WX
WX EMR
EMR
DTCS
DTCS
FM
FM
1713
1713
PSKIP
PSKIP
+DUP
+DUP
25
25
A
MemoName
MemoName
PRIO
PRIO WX
WX EMR
EMR
DTCS
DTCS
DV
DV
662
662
PSKIP
PSKIP
+DUP
+DUP
25
25
Tone scan for tone squelch/
repeater tone.
Tone scan for DTCS squelch.
The decimal point is blinking while
tone scanning.
.
T.SCAN
7
TONE
DSQ
CD
#
[DIAL]
Summary of Contents for IC-92A
Page 144: ...New2001 A 6616H 1EX ...