Icom IC-92A, Instruction Manual

Page: 90 / 144

Ne
86
9
SCAN OPERATION
New2001
■
Memory bank scan
IMPORTANT!: To perform memory bank scan, 2 or more
bank channels MUST be programmed, otherwise the
scan will not start.
q
Push [S.MW](MR) several times to select memory bank
mode.
w
Set the squelch level.
e
While pushing and holding [SCAN](2) , rotate [DIAL] to
select the desired scanning type.
• “ALL” for all bank scan; “BANK-LINK” for bank link scan or
“BANK-x” for bank scan (x= A to Z; programmed bank groups
are only displayed.), “DUP” (appears only when duplex opera-
tion is set) for duplex scan.
r
Release [SCAN](2) to start the selected scan.
• Scan pauses when a signal is received.
• Rotate
[DIAL] to change the scanning direction, or resumes
manually.
t
To stop the scan, push [VFO] .
The bank-link setting can be changed in scan set mode.
See page 97 for details.
Duplex scan function: Repeatedly scans two frequen-
cies (transmission/reception) during duplex scan opera-
tion.
FM
A
146 010
μ A01 A01
SCAN:ALL SCAN:ALL
FM
A
148 800
μ A01
SCAN:BANK-LINK SCAN:BANK-LINK
FM
A
148 800
μ A01 A01
SCAN:BANK-A SCAN:BANK-A
PSKI PSKIP
PSKI PSKIP
PSKI PSKIP
• All bank scan selection
• Bank scan selection
• Bank link scan selection
Selectable between “A” to “Z”
if programmed.
[DIAL]
VFO
MHz
A
MR
S.MW
B
2
SCAN
FM
A
μ
888
148 800
• During all bank/bank link scan • During bank scan
FM
A
μ
A88
148 800