Icom IC-92A Instruction Manual Download Page 70

Page: 70 / 144

GPS/GPS-A OPERATION (Optional UT-121 is required for IC-92A)

New2001

Rotate

[DIAL]

†

to select desired items (NAME, TIME,

LATITUDE, LONGITUDE, BANK or BANK NAME), then
push

[ ](6)

to edit the selected item.

Rotate

[DIAL]

†

to select the desired character or symbol.

Push

[ ](6)

to select 2nd digit, then rotate

[DIAL]

†

to se-

lect the desired character or code.

•

Push

[ ](6)

to move the cursor right; push

[ ](4)

to move the

cursor left.

• 2nd digit blinks (1st digit stops blinking).

Repeat the steps

and

to enter the desired message.

• Up to 20-character messages can be set.

Push

[

](5)

to add the GPS data.

Push

[MENU/

]

to return to frequency indication.

GPS alarm setting

GPS alarm sounds when your own position is close the

specified area. This function can be set the received chan-

nel, speciﬁ ed GPS memory channel, all GPS memory chan-
nels or a memory bank.

Enter “GPS MEMORY” in message/position set mode.

• GPS MEMORY screen is displayed.

Rotate

[DIAL]

†

to select the desired memory bank or

memory channel.

• “RX”, “ALL”, one of the memory bank or memory channel can

be selected.

• Skip

and operate

when alarm RX, ALL, BANK A–Z set.

ALL

:SET
:BACK

:SEL
:EDIT

:EDIT
:ALM

GPS MEMORY

01:BAY

AREA

02:KOBE

AIR

:SET
:BACK

:BACK

:SEL

:SEL
:EDIT

:EDIT
:ALM

:ALM

BANK A

❮

MENU screen

❯

➪

❮

MESSAGE/POSITION

❯

➪

❮

GPS MEMORY

❯

(Push

[MENU/

]

) (Rotate

[DIAL]

†

, then push

[

](5)

†

01:BAY

ARE

02:KOBE

AIR

:SET

:SET
:BACK

:BACK

:SEL

:SEL
:EDIT

:EDIT
:ALM

:ALM

BANK A

Alarm mark
Appearing at 8-digits
of memory name.

Summary of Contents for IC-92A

















































































































































Search results

Summary of Contents for IC-92A

Reviews:

Brands by name

Popular brands

Icom IC-92A, Instruction Manual

Search results

Summary of Contents for IC-92A

Reviews:

Brands by name

Popular brands