![background image](http://html.mh-extra.com/html/icom/ic-7600/ic-7600_instruction-manual_612307044.webp)
35
3
BASIC OPERATION
Band edge warning beep (Continued)
D
To programming the band edge:
q
Perform the steps
q
to
t
as shown above, then select
either “ON (User)” or “ON (User) & TX Limit” setting.
•
[BAND] appears above the function switch (F-5).
w
Push
[BAND] (F-5) to open the band edge screen.
e
Push
[
Y
] (F-1) or [
Z
] (F-2) to select the desired
band edge.
• Push
[
Ω
≈
] (F-3) to select the upper and lower band
edge frequency entry cell.
• Push
[INS] (MF6) to insert a new blank band edge line.
• Hold down
[DEL] (MF7) for 1 second to delete the
selected band edge line.
r
Input the desired frequency with the keypad, then
push
[F-INP•ENT]
.
• Push
[GENE •]
to input decimal point (“.”) between the
MHz and kHz digits.
• Program each channel from left to right and each
frequency must be higher than the preceding
frequency.
• The frequency that is duplicated, or out of an amateur
band, cannot be programmed.
•
If you want to return the band edge frequencies to their
default (initial) value, hold down
[DEF] (F-4) for 1 second.
The band edge initialize screen appears, then hold
down
[OK] (F-5)
for 1 second to initialize all band edge
frequency settings.
t
Push
[EXIT/SET]
to exit the set mode.
NOTE:
All frequency ranges are set to default. So
you should delete or change it to add the desired
band edge frequency.
Main dial
EXIT/SET
F-5
F-1
F-2
F-3
F-4
DEF
[INS]
[DEL]
Keypad
OK
/
BAND
• Band edge screen
Summary of Contents for IC-7600
