![background image](http://html.mh-extra.com/html/icom/ic-7600/ic-7600_instruction-manual_612307129.webp)
■
Automatic antenna selection
The transceiver covers 0.03–60 MHz over 10 bands.
Each band key has a band memory which can
memorize a selected antenna (ANT1, ANT2, ANT1/
RX antenna and ANT2/RX antenna).
When you change the operating frequency beyond a
band, the previously used antenna is automatically
selected. This function is convenient when you use 2
or 3 antennas.
To use the band memory, select the set mode and
confirm that “Auto” is selected as the
[ANT] switch
option. (p. 138)
• Antenna selection mode: “Auto” (default)
The antenna tuner ON/OFF condition is also
memorized in the band memory.
[Example]: a 3.5/7 MHz antenna is connected to
[ANT1], a 21/28/50 MHz antenna is connected to
[ANT2].
When the antenna selector function is set to “Auto,”
an antenna is automatically selected when the
transceiver changes bands.
• Antenna selection mode: “Manual”
[ANT] (MF1) functions, however, band memory does
not function. In this case, you must select an antenna
manually.
When using an external antenna selector for more
than 3 antennas (except for a receive antenna),
“Manual” should be selected as the
[ANT] switch the
set mode item. (p. 138)
NOTE: When “Auto” or “Manual” is selected, the
antenna tuner ON/OFF condition is consistent with
[ANT] (MF1).
• Antenna selection mode: “OFF”
[ANT] (MF1) does not function and [ANT1] is always
selected.
8
120
ANTENNA TUNER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3.5/7 MHz
bands
21/28/50 MHz
bands
RX
only
ANT1
ANT2
RX ANT
IN
ANT
Summary of Contents for IC-7600
