![background image](http://html.mh-extra.com/html/icom/ic-7600/ic-7600_instruction-manual_612307023.webp)
o
RTTY TUNING INDICATOR
Shows the tuning condition in the RTTY mode.
!0
MODE INDICATOR
Shows the selected mode.
!1
FREQUENCY READOUTS
Shows the operating frequency.
• Gray characters are used for not-selected readout.
!2
MEMORY CHANNEL READOUTS
➥
Shows the selected memory channel contents
in VFO mode.
➥
Shows the VFO contents in memory mode.
!3
SELECT MEMORY CHANNEL INDICATOR (p. 117)
Displays the displayed memory channel is set as a
select memory channel.
The select memory channels are used in the select
scan operation. The desired memory channels can
be assigned to 3 select groups, for fast, convenient
scanning.
!4
MULTI-FUNCTION SCREEN
Shows the screens for the multi-function digital
meter, spectrum scope, voice recorder, memory
list, scan, memory keyer, RTTY decoder, PSK
decoder, IF filter selection, or set modes.
!5
VFO/MEMORY CHANNEL INDICATOR (p. 28)
Displays the VFO mode or selected memory
channel number.
!6
LCD FUNCTION SWITCH GUIDE
Displays the function of the LCD function switches
([F-1] to [F-6]).
!7
MULTI-FUNCTION SWITCH GUIDE
Displays the function of the multi-function switches.
!8
TX INDICATOR
➥
“
”
appears while transmitting.
(p. 40)
➥
Displays the frequency readout for transmit.
• “
” appears during an operating frequency
is not in an amateur band. When the band edge
warning beep is set to “OFF” (p. 34), “
” does
not appear.
• Appears on the sub band readout when the split
function is turned ON.
!9
RIT INDICATOR
“
” appears when RIT function is in use.
@0
∂
TX INDICATOR
“
” appears when
∂
TX function is in use.
@1
RIT/
∂
TX SHIFT FREQUENCY INDICATOR
Shows the shift frequency for the RIT or
∂
TX
function.
@2
NOTCH INDICATOR (p. 91)
➥
“
” appears when the manual notch function
is in use. This function is available in
the
SSB,
CW, RTTY, PSK and AM modes.
➥
“
” appears when the auto notch function is
in use. This function is available in
the
SSB, AM
and FM modes.
@3
APF/TPF INDICATOR
➥
“
” appears when the audio peak filter
function is in use. This function is available in
the CW mode. (p. 43)
➥
“
” appears when the twin peak filter
function is in use. This function is available in
the RTTY mode. (p. 51)
@4
DUAL WATCH INDICATOR
“
” appears when the dualwatch function
is in use.
14
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Summary of Contents for IC-7600
