manualshive.com logo in svg

Icom IC-7600, Instruction Manual, Page: 148 / 196

Share
Download
Icom IC-7600 Instruction Manual Download Page 148

   RTTY  Shift  Width

   170

Selects the RTTY shift width. There are 3 selectable 
values: 170, 200 and 425 Hz. (default: 170 Hz)
170 Hz is automatically selected when the internal 
RTTY decoder is used.

   RTTY  Keying  Polarity

   Normal

Selects the RTTY keying polarity. Normal or reverse 
keying polarity can be selected. (default: Normal)
When reverse polarity is selected, Mark and Space 
are reversed.

• Normal  : Key open/close = Mark/Space
• Reverse : Key open/close = Space/Mark

   PSK  Tone  Frequency

   1500

Selects the desired PSK tone frequency for the PSK 
reception between 1000, 1500 and 2000 Hz.
(default: 1500 Hz)

   SPEECH  Language

   English

Selects the speech language from English and 
Japanese. (default: English)

   SPEECH  Speed

   HIGH

Selects the speech speed from HIGH (faster) and 
LOW (slower). (default: HIGH)

   SPEECH  S-Level

   ON

The IC-7600 speech processor can announce 
frequency, mode and signal level. Signal level 
announcement can be deactivated if desired.
(default: ON)
When “OFF” is selected, the signal level is not 
announced.

• OFF  :  Signal level is not announced. (Operating 

frequency and mode are announced.)

• ON   :  Signal level, operating frequency and mode 

is announced.

   SPEECH  [MODE]  Switch

   OFF

Selects the operating mode speech capability when 
a mode switch is pushed. (default: OFF)

• OFF  :  Operating mode speech capability OFF
• ON   :  Operating mode speech capability ON
         The selected operating mode is verbally 

announced when a mode switch is pushed.

   [SPEECH/LOCK]  Switch

   SPEECH/LOCK

Selects the [SPEECH/LOCK] switch action.
(default: SPEECH/LOCK)

• SPEECH/LOCK :  

(Push) The voice synthesizer 
function is activated.

      

   

(Hold down) The dial lock 
function is turned ON or OFF.

• LOCK/SPEECH :  

(Push) The dial lock function is 
turned ON or OFF.

     

   

(Hold down) The voice 
synthesizer function is activated.

139

10

SET MODE

Others set mode (Continued)

 

■

Summary of Contents for IC-7600





































































































































































































Reviews:

No comments