Icom IC-7600, Instruction Manual, Page: 125 / 196

■
Fine programmed scan/Fine
∂
F scan
116
7
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
F-1 F-5 EXIT/SET
Main dial
PROG SCAN
RECALL
F-3 F-2
∂ F FINE
In fine scan (programmed or ∂ F), the scan speed
decreases when the squelch opens, but the
transceiver keeps scanning. The scanning tuning step
shifts from 50 Hz to 10 Hz when the squelch opens.
q
Push
[EXIT/SET] several times to close any multi-
function screens, if necessary.
w
Push
[SCAN] (F-5) to select the scan screen.
e
Set for programmed scan or ∂ F scan as described
on the previous page.
r
Push
[PROG] (F-1) or [
∂
F] (F-2) to start a scan.
• “ ” or “ ” and decimal
points blink while scanning.
t
Push
[FINE] (F-3) to start a fine scan.
• “ ” or “ ”
blinks instead of “ ” or “ , ”
respectively.
y
When the scan detects a signal, the scan speed
decreases but scan does not stop.
u
Push [PROG] (F-1) or [ ∂ F] (F-2) to stop the scan,
push [FINE] (F-3) to cancel the fine scan.
• Rotating the main dial also cancels the scan.
i
Hold down
[RECALL] (F-5) for 1 second to recall
the frequency that is set before starting the scan, if
desired.