Icom IC-7600 Instruction Manual Download Page 60 | Manualshive

Page: 60 / 196

Icom IC-7600 Instruction Manual Download Page 60

51

4

RECEIVE AND TRANSMIT

D

About RTTY reverse mode

Received characters are occasionally garbled
when the received signal is reversed between Mark
and Space tones. This reversal can be caused by
incorrect TNC connections, setting, commands, etc.

To receive a reversed RTTY signals correctly, select
the RTTY-R (RTTY Reverse) mode.

➥

During the RTTY mode, hold down

[RTTY/PSK] for

1 second to select the RTTY-R mode.

• Check the received signal.

D

Twin peak filter

The twin peak filter changes the audio frequency
response by boosting the mark and space
frequencies (2125 and 2295 Hz) for better reception
of RTTY signals.

➥

During the RTTY mode, push

[APF/TPF] to turn

the twin peak filter ON or OFF.

• “

” appears in the LCD and the indicator on

this switch lights green while the filter is in use.

NOTE: When the twin peak filter is in use, the
received audio output may increase. This is a
normal, not a malfunction.

Normal

Reverse

Space Mark

BFO

Space Mark

BFO

170 Hz

2125 Hz

170 Hz

2125 Hz

APF/TPF

«
...
58
59
60
61
62
...
»

Summary of Contents for IC-7600





































































































































































































Reviews:

No comments