![background image](http://html.mh-extra.com/html/icom/ic-7600/ic-7600_instruction-manual_612307143.webp)
■
Display set mode
Bright (LCD)
50%
Adjusts the LCD unit brightness from 0% (dark) to
100% (bright) range in 1% steps. (default: 50%)
NOTE: When you set the LCD brightness to 0%,
nothing may appear on the screen. Adjust the
LCD brightness until some indicators appear on
the screen, then set it to your desired level.
Backlight (Switches)
80
Adjusts the switch indicators brightness from 1
(dark) to 100 (bright) range in 1 steps. (default: 80)
Display Type
A
Selects the desired display type from A (Black back)
and B (Blue back). (default: A)
See page 154 for details.
Display Font
Basic
Selects the desired font for frequency readout from
Basic, Italic and Round. (default: Basic)
See page 154 for details.
Meter Response
MID
Set meter needle response from SLOW, MID and
FAST. (default: MID)
This setting is effective for the standard and
edgewise meter type selections only.
Meter Type (Normal Screen)
Standard
Selects the desired S/RF meter type during normal
screen display from Standard, Edgewise and Bar.
(default: Standard)
Meter Type (Wide Screen)
Bar
Selects the desired S/RF meter type during wide
screen or mini scope display from Edgewise and
Bar. (default: Bar)
Meter Peak Hold (Bar)
ON
Turns the meter peak hold function ON or OFF.
(default: ON)
This function is used for the bar meter only.
Memory Name
ON
Sets the memory name display, during memory
mode operation, ON or OFF. (default: ON)
• OFF : No memory name is displayed even a
memory name is programmed.
• ON : The programmed memory name is
displayed above the frequency display.
134
10
SET MODE
10
Continued on the next page.
☞
Summary of Contents for IC-7600
